Speedlifter Classic

Speedlifter Classic

Ab 62.95 €Ab 72.95 €

MSRP from 59,95€

· tool-free handlebar height adjustment

· for 1 ⅛” A-Head fork

· incl. reducing sleeve with stop collar for stem mounting

· for aluminium fork shaft available as T6 with ø 24,4 and 24,6mm

· for steel fork shaft available as T6, T8 , T10, T12, T15 with ø 25,4mm

· T12 and T15 are only approved for trekking use !

· tool-free handlebar height adjustment

SKU: o. A. - Button "Produkt kaufen" ist eine Weiterleitung zu unserem offiziellen Webshop! Category:


As the first model and original variant of the popular by.schulz handlebar adjustment systems, the Speedlifter Classic, which has been installed many times, scores with its tool-free, quick handlebar height adjustment. The system is therefore ideally suited as an indispensable basic equipment for sporty city and trekking bikers as well as e-bikers who want to keep the handlebar height and riding position easily adjustable and on tour spontaneously choose between upright or sporty. The Speedlifter Classic is available in five different versions with different pull-out heights from 60 to 150 mm. Clever: Thanks to the vertical guidance integrated in the pull-out shaft, the tiresome alignment of handlebar and stem is no longer necessary when changing the handlebar height. Speedlifter Classic: The easy solution for individual posture finding on the bike!

The Speedlifter systems can be installed on bicycles with A-Head forks with metal fork shafts. There are currently various versions available for 1⅛” shafts with an outside diameter of 28.6 mm and 1¼” for an outside diameter of 31.6 mm. For installation, the upper end of the steerer tube should be slotted at the rear in the direction of travel and protrude at least 46 mm above the headset. Speedlifter systems are available for threadless metal steerer tubes in various diameters and extension lengths from 60 to 220 mm. The variants can be selected depending on the technical installation requirements for aluminium or steel fork shafts.

Tech. Data

  • Material : Aluminium AL-6061-T6, AL-6066-T6, 3D forged
  • Colour : black anodized
  • Shaft Diameter : ø 24,4 – 25,4mm
  • Lengths : 60mm to 150mm
  • Weight : from approx. 283g
  • Scope of delivery: Speedlifter Classic 1 ⅛“ incl. reducing sleeve, Top Cap Rubber and instructions


The height of the handlebar is important for ride comfort, but there is no ideal handlebar height. A different height is recommended for uphill riding than for downhill or city riding. Intuitively, you balance the differences with your arms and back – but that’s often tiring. With the Speedlifter you can easily adjust the handlebar height by hand: you open the quick release lever – adjust to the desired handlebar height and close the quick release lever again. It’s all very simple, in a matter of seconds without tools.

Assembly Instruction

Speedlifter Classic / Twist Montageanleitung

In these assembly instructions you will find out how our Speedlifter is installed in your bike and how you can use it.

installation requirements