>> Bike Ordertag Nord. Sa. 22.08. – Sun. 23.08. Visit our by,schulz booth << >> Bike&Co Orderfestival. Fr. 04.09. – Sun. 06.09. Visit our by,schulz booth <<

G.2 ST-PRO – Parallelogram Spring Seatpost

The suspension bike seatpost for greater riding comfort offers:

  • Responsive handling, high riding comfort
  • Easy spring and seat replacement
  • Rated for rider weights up to 125 kg
  • Spring elements available in 4 firmness levels, selectable according to rider weight
  • Seat clamp with fine adjustment, robust locking mechanism, and defined end stop
  • Suitable for seat tube angles from 73° to 64° / e.g., cargo bikes

Available in stores starting in December 2026!

UVP ab 199,95 €

G.2 ST-PRO Parallelogram SpringSeatpost – Optimal saddle angle adjustment for cargo bikes

The G.2 ST-PRO was developed specifically to meet the demands of modern cargo bikes.

Its key advantage: an innovatively designed head tube that allows for significantly greater saddle adjustment for seat tube angles ranging from 73° to 64°—even with very shallow seat tube angles, which are typical for cargo bikes.

The by,schulz G.2 ST-PRO parallelogram suspension seatpost impresses with its responsive handling and high level of riding comfort. Its proven parallelogram suspension mechanism offers 30 mm of travel with a height of just 115 mm. Whether on cobblestones or bumpy gravel paths—it reliably absorbs shocks and makes rides on city or trekking bikes noticeably more comfortable.

For a customized suspension setup, steel springs are available in four different stiffness levels. This allows you to adjust the seatpost to your body weight and desired level of comfort. Changing the springs is easy and can be done in just a few simple steps.

If the diameter of the seatpost is smaller than the inside diameter of the frame’s seat tube, the difference can be compensated for with a G.Shim reducer sleeve of the appropriate size.

The Mudcover neoprene cover included in the scope of delivery protects against dirt and weather.

MaterialAluminum AL-6061-T6, AL-6066-T6, 3D forged
OffsetApprox. 14 mm

The Parallelogram suspension seatpost was designed to offer you the highest level of riding comfort, whether in the city or on rough terrain. The suspension is progressively tuned, meaning the system responds softly to light impacts and with increasing spring resistance to hard impacts.

When compressed, the G.2 ST-PRO parallelogram suspension seatpost extends backward by up to approximately 14 mm.

Thanks to the use of a heavy-duty flat-wire steel spring as well as technical elastomers in the spring eye and on the inner sides of the arms, even hard impacts (e.g., when riding through deep potholes) do not cause the suspension to bottom out. In addition, the rearward rebound motion is damped by the hemispherical elastomers in the head and base sections. Easily interchangeable spring elements with different spring rates are available to optimally adjust the G.2 ST-PRO to the rider’s weight and riding style.

  • Make sure that the inner diameter of the bicycle frame’s seat tube and the outer diameter of the G.2 ST-PRO are the same.
  • Differences in these measurements can lead to the clamp failing, as well as to accidents and property damage or personal injury.
  • A reducer sleeve can be used to adjust the seatpost’s tube diameter to match the seat tube’s dimensions. To adjust the seatpost tube, we recommend the G.Shim double-slotted aluminum reducer sleeve from by,schulz, which is designed for this purpose. The following diameters and lengths are available:

  • If using a reducer sleeve from another manufacturer, it should be made of aluminum and have a minimum length of 90 mm. Make sure the reducer sleeve is always fully inserted into the seat tube.

You can find the appropriate torque wrench in our official online store.